The TH Series end suction centrifugal pumps are available in either close-coupled or frame mounted configurations. With optional materials, the TH Series line extends the hydraulic coverage across 70 different sizes with heads to 710 ft and flows to 3,000 GPM. The TH series are ideally suited for a wide variety of applications, including heating, air conditioning, pressure boosting, cooling water transfer, and water supply.
Discharge Size: 1 to 6 inch
Range of HP:
– to 60 HP, close coupled
– to 300 HP, frame mounted
Capacity: to 3,000 GPM
Head: to 710 Ft.
Liquid: clean water
Close coupled or frame mounted design
Design saves space
Standard flanged connections; optional threaded connections available
Back pullout construction
– provides for ease of maintenance or repair without disturbing suction and discharge connections
Top centerline discharge ensures self-venting
Integral foot mounted casing facilitates back pull-out feature
High quality mechanical shaft seals and o-rings
Optional Cast Stainless Steel Construction
EVMU, EVMUL, EVMUG
With initial hydraulic coverage to 100 GPM and 800 feet TDH, the EBARA model EVMU is designed for booster, water purification, and hot water applications.
State-of-the-art formed stainless steel and several proprietary internal components make the EBARA model EVMU superior to existing designs. The EVMU material is between 50 to 100% thicker than all current similar product offerings, for a true industrial design with cast stainless steel flanges for maximum installation support.
EVMU 32, 45 and 64 models consist of cast iron or 304SS hydraulic assemblies. Different mechanical seal face options are available for the three models and incorporate a separate thrust bearing in lieu of motor bearings, a popular design feature.
Models EVMU3-18, EVMUL 3-64 are NSF/ANSI 61 Annex G listed
Suction Size: 1 1/4″ to 4″ ANSI
Discharge Size: 1 1/4″ to 4″ ANSI
Range of HP: 1/2 to 50 HP
Capacity: 4 to 390 GPM
Head: 27 to 930 Ft.
Working pressure: 370 PSI (25 Bar) max. (see page technical section, page 813 for specific pressure information)
Temperature: 5 ̊ to +248 ̊F (-15 ̊ to 120 ̊C)
Liquid: clean water, hot water
Standard NEMA motors
Integral thrust bearing on 3 HP and larger pumps – to handle axial thrust loads
Air vent in casing cover – allows proper venting, preventing air entrapment and dry run
Liner ring – self-aligning, floating design constructed to prevent swelling at high temperatures
Tungsten carbide lower pump bearings and sleeves – standard construction for all services, providing maximum operating life
Direct drive – pump and motor shafts are keyed for positive, reliable power transmission with no adjustments necessary
“Flexible” floating outer casing – allows for thermal expansion in hot water applications, preventing deformation due to pressure fluctuations
Anti-erosion measures – a dish-shaped insert is fitted to the intermediate casing designed to promote smooth flow and prevent high velocity areas