Slurry Pumps

  • A Flowserve Titan Slurry Pump.
A Flowserve Titan Slurry Pump.

Titan-Slurry

The Flowserve Titan Slurry pump is a true mill circuit slurry pump. It reflects the company’s innovation and engineering expertise in hydraulic design, materials science and manufacturing excellence. General Industries, Mining, Water Resources, Primary Metals, Pulp and Paper, Power Generation.

Industry Sectors

  • Pulp & Paper
  • Mining
  • Steel & Primary Metals
  • Other Industries
  • Waste Water
  • Conventional Steam

Operating Parameters

  • Flows to 3,600 m3/h (16,000 gpm)
  • Heads to 90 m (300 ft)
  • Pressures to 40 bar (580 psi)
  • Temperatures to 110°C (230°F)

Features and Benefits

  • Dual Casing provides access to elastomeric or hard metal liners for inspection or replacement
  • Machined mating faces provide proper liner compressions
  • Elastomeric and Hard Metal Liners are fully interchangeable, allowing the most economical material to be used
  • High-Efficiency, Closed Vane Impeller has adjustable face clearance and generous wear allowance
  • Threaded shaft to impeller design eliminates troublesome impeller nut
  • Removable Stuffing Box converts to various shaft sealing options without modification to the shaft, liner or impeller
  • Bearing Cartridge incorporates back-to-back taper roller bearings to carry axial and belt loads
  • A roller bearing

LC

The LC chemical slurry pump is a horizontal, frame mounted, single stage, end suction design with a tangential discharge nozzle. It is engineered to withstand the rigor of applications that are both abrasive and corrosive.

Industry Sectors

  • Pulp & Paper
  • Mining
  • Corn Wet Milling & Ethanol
  • Other Industries
  • Basic (Organic & Inorganic)
  • Specialty (Fine & Consumer)
  • Biofuels
  • Pharmaceutical
  • Water
  • Water Management

Operating Parameters

  • Flows to 8000 m3/h (35200 gpm)
  • Heads to 90 m (300 ft)
  • Pressures to 25 bar (360 psi)
  • Temperatures to 140°C (285°F)
  • Specific gravities to 1.7

Features and Benefits

  • Concentric casing with tangential discharge
  • Rigid, one-piece bearing frame with two angular contact outboard bearings and roller inboard bearings
  • Large diameter, heavy-duty shaft
  • Choice of shaft sealing options – Wet gland packing – Single or double mechanical seal – High-pressure double mechanical seal – Special high solids seals – Alumina industry seal
  • Choice of materials of construction
  • Multiple impeller designs
  • Direct-coupled or belt-driven
  • Choice of six drive arrangements
  • Options – Inducer – Stuffing box cooling system

Configurations

  • PL-C: Cantilever, chemical slurry sump
  • LC-S: Lineshaft, chemical slurry sump

M

The M hard-metal slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Fitted with a hard metal liquid end, the M pump is engineered to handle high concentrations of coarse, abrasive solids in suspension.

Industry Sectors

  • Pulp & Paper
  • Mining
  • Steel & Primary Metals
  • Waste Water
  • Upstream Exploration & Production

Operating Parameters

  • Flows to 10,000 m3/h (44,000 gpm)
  • Heads to 90 m (300 ft)
  • Pressures to 10 bar (150 psi)
  • Temperatures to 120⁰C (250⁰F)
  • Solids from 2% to 70% by weight

Features and Benefits

  • One-piece high chrome iron, concentric casing with replaceable gland and suction side wear plates
  • Closed impeller with pump-out vanes on front and rear shrouds
  • Standard packing stuffing box with replaceable wear plate
  • Full and low-flow flush connections
  • Heavy-duty bearing frame designed for V-belt loads
  • Cartridge style bearings
  • Parts interchangeable with R pump
  • Three-point external end clearance adjustment
  • Options – Vortex semi-recessed impeller – Hard metal expeller – Mechanical seal housing

R

The type R rubber-lined slurry pump is a horizontal, single-stage, end suction design, with a tangential discharge nozzle. Engineered to handle high concentrations of fine abrasive solids in suspension or corrosive/abrasive mixtures.

Industry Sectors

  • Pulp & Paper
  • Mining
  • Steel & Primary Metals
  • Waste Water
  • Upstream Exploration & Production

Operating Parameters

  • Flows to 10,000 m3/h (44,000 gpm)
  • Heads to 50 m (165 ft)
  • Pressures to 10 bar (150 psi)
  • Temperatures to 110⁰ C (225⁰ F)
  • Solids from 2% to 70% by weight

Features and Benefits

  • Concentric, cast iron casing with replaceable, abrasion-resistant rubber liner
  • Rubber-lined, closed impeller with front and rear pump-out vanes
  • Standard packing stuffing box with replaceable wear plate
  • Full and low-flow flush connections
  • Heavy-duty bearing frame
  • Three-point external end clearance adjustment
  • Parts interchangeable with M pump
  • Directly coupled or V-belt driven
  • Options – Acid-resistant stuffing box kits – Hard metal expeller – Mechanical seal housing – Choice of liner materials
Flowserve Logo