Search 1.866.293.7867
Home / Products / Submersible Sewage Pumps
Get a Quote
Pumps

1.866.293.7867
sales@epumpsok.com

Submersible Sewage Pumps

Submersible Sewage Pumps

Model DLFU

Submersible cast iron wastewater, sewage pump

The model DLFU submersible non-clog pumps are constructed of rugged cast iron with heavy-duty motors suitable for industrial and municipal water supply and wastewater applications, including lift stations, sewage treatment and flood control. Model DLFU submersible pumps are easy to install and maintain. The high-efficiency impeller is able to pass large and fibrous solids up to 3 1/4″.

Specifications

  • Discharge Size: 2″ to 12″
  • Range of HP: 2 to 60 HP
  • Capacity: 13 to 4000 GPM
  • Head: 7 to 243 Ft.
  • Max. solid diameter: 3 1/4″
  • Max. liquid temperature: 104°F (40°C)
  • FM explosion proof available

Key Features

  • Heavy-duty, air-filled Class H insulated motor – operates cooler with higher efficiencies
  • Watertight cable entry system – protects against moisture and capillary action; reduces maintenance costs
  • Self cooling jacket
  • 60,000 hour single and double row thrust bearings – long dependable operation, lowers maintenance costs
  • High-efficiency impellers – handle stringy, fibrous material with the ability to pass large solids and prevent clogging; impellers are optimized for hydraulic coverage lowering operating costs
  • Double mechanical seals – operate in an oil bath providing longer service life and lower maintenance costs
  • Stainless steel shaft – high tensile strength and corrosion resistance
  • Replaceable wear components – maintain working clearances while reducing casing and volute costs

Applications

  • Industrial
  • Municipal
  • Water
  • Wastewater
  • Lift stations
  • Packaged pump systems
  • Storm water and Flood control

Model EBG, EBHG

Submersible cast iron grinder pump

The model EBG, EBHG submersible grinder pump series handle residential or light commercial sanitary waste in pressurized sewer systems. The heavy-duty, high chrome iron grinder system has powerful blades that reduce solid sizes to a fine slurry for smooth, non-clogging flow. The pump is small and lightweight affording ease in transport and ideal for use in temporary installations.

Specifications

  • Discharge Size: 1 1/4″ NPT, 2 1/2″, 3″ ANSI
  • Range of HP: 2 to 10 HP
  • Capacity: 20 to 180 GPM
  • Head: 8 to 170 Ft.
  • Max. liquid temperature: 120°F (49°C) [140°F (60°C) intermittent]

Key Features

  • Casing – durable cast iron ASTM A-48, Class 30
  • Heavy-duty hardened stainless steel grinder system – powerful blades create a fine slurry for non-clogging flow and provide trouble free, dependable operation
  • Open vortex type recessed impeller – vortex action prevents clogging and handles stringy material better providing durability, high reliability with lower maintenance costs
  • Oil filled, Class F insulated heavy-duty motor – operates cooler with higher efficiencies
  • Built-in motor protection – protects against overheat, out of phase, single phasing and no load
  • 50,000 hour bearings – provides long dependable operation and lowers maintenance costs
  • Double mechanical seals – provide longer service life and lower maintenance costs
  • Stainless steel shaft – high tensile strength and corrosion resistance
  • Small and lightweight – easy portability
  • High head option available
  • Economical alternative for challenging residential/commercial installations

Applications

  • Residential/Commercial sanitary waste
  • Small scale pressurized sewage transfer systems
  • Drainage transfer

Model DLU

Submersible cast iron submersible sewage pump

The model DLU submersible pumps are constructed of rugged cast iron suitable for sewage and wastewater applications. Designed with semi-open impellers that have a large wear area and open passageways, the model DLU offers the best handling for stringy and/or abrasive materials.

Specifications

  • Discharge Size: 2″, 3″, 4″
  • Range of HP: 1 to 5 HP
  • Capacity: 13 to 430 GPM
  • Head: 9 to 66 Ft.
  • Max. liquid temperature: 104°F (40°C)
  • Max. solid diameter: 3″
  • Available in single or three phase models

Key Features

  • Air-filled Class F insulated heavy duty motor – operates cooler with higher efficiencies
  • Built-in motor protection autocut – protects against overheat, out of phase, single phasing and no load
  • 60,000 hour bearings – long dependable operation, lower maintenance costs
  • Large solids handling capabilities – prevents clogging
  • Semi-open impellers – best design for handling stringy and abrasive materials providing durability and longer life
  • Double mechanical seals – operate in an oil bath providing longer service life and lower maintenance costs
  • Stainless steel shaft – high tensile strength and corrosion resistance

Applications

  • Sewage
  • Water
  • Wastewater
  • Drainage (household, industrial)
  • Irrigation

Model DVU

Submersible semi-open vortex impeller sewage pump

The model DVU submersible pumps are constructed of rugged cast iron suitable for water, wastewater and sewage applications. The model DVU features a semi-open vortex impeller suited for pumpage containing abrasive and/or large suspended solids. The vortex action of the impeller passes large solids and works to prevent clogging.

Specifications

  • Discharge Size: 2″, 3″, 4″
  • Range of HP: 1 to 5 HP
  • Capacity: 16 to 430 GPM
  • Head: 10 to 50 Feet
  • Max. solid diameter: 4″
  • Max. liquid temperature: 104°F (40°C)
  • Available in single or three phase models

Key Features

  • Air-filled Class F insulated heavy duty motor – operates cooler with higher efficiencies
  • Built-in motor protection autocut – protects against overheat, out of phase, single phasing, and no load
  • 60,000 hour bearings – long dependable operation, lower maintenance costs
  • Large solids handling capabilities – prevents clogging
  • Semi-open vortex type recessed impeller -multi-vane vortex design handles stringy material better and prevents clogging providing high reliability, durability and lower maintenance costs
  • Double mechanical seals – operate in an oil bath providing longer service life and lower maintenance costs
  • Stainless steel shaft – high tensile strength and corrosion resistance

Applications

  • Water (municipal/industrial)
  • Wastewater (municipal/industrial)
  • Sewage
  • Drainage (household, industrial)
  • Agriculture

Model DGUII, DGFU

Submersible cast iron grinder pump

The model DGUII, DGFU cast iron submersible grinder pumps are ideal for use in small-scale pressurized commercial or residential sewage transfer systems requiring low flow and high pressure rates. The heavy-duty high chrome iron grinder system has powerful blades that reduce solid sizes for smooth, non-clogging flow. A reversible grinder ring provides longer service life and less maintenance. The pump is small and light weight affording ease in transport and use in temporary installations. FM explosion proof motors are available.

Specifications

  • Discharge Size: 1 1/4″, 2″
  • Range of HP: 2 to 5 HP
  • Capacity: 5 to 80 GPM
  • Head: 27 to 148 Ft.
  • Max. solid diameter: 3″
  • Max. liquid temperature: 104°F (40°C)
  • FM explosion proof available

Key Features

  • Heavy-duty high chrome iron grinder system – powerful blades reduce solid size for non-clogging flow
  • Semi-open vortex type recessed impeller – vortex action prevents clogging and handles stringy material better providing durability, high reliability with lower maintenance costs
  • Air-filled Class F insulated heavy duty motor – operates cooler with higher efficiencies
  • Built-in motor protection – protects against overheat, out of phase, single phasing and no load
  • 60,000 hour bearings – long dependable operation, lower maintenance costs
  • Double mechanical seals – hard faced upper and lower seals operate in an oil bath providing longer service life and lower maintenance costs
  • Stainless steel shaft – high tensile strength and corrosion resistance
  • Small and light weight portability – easy to transport for temporary installations

Applications

  • Residential/Commercial sanitary waste
  • Small-scale pressurized sewage transfer systems
  • Drainage transfer
  • Available in packaged basin systems

K-Series: Model DLKFU

Submersible cast iron wastewater, sewage pump

The Ebara K-series design features address the most common reasons for clogging caused by fibrous materials.

Ebara DLKF series pumps are designed to tackle clogging challenges. The Ebara K-series submersible sewage pump maintains the same quality and durability of the Ebara DLF line but with enhanced passage capabilities for handling of fibrous waste.

Specifications

  • Discharge Size: 2″ to 12″
  • Range of HP: to 60 HP
  • Capacity: to 4000 GPM
  • Head: 7 to 243 Ft.
  • Max. solid diameter: 3 1/4″
  • Max. liquid temperature: 104°F (40°C)
  • FM explosion proof available

Key Features

  • Reduces material caught on the vane tips
  • Increases inlet pressure which keeps debris moving instead of recirculating
  • E-liminator groove disrupts the accumulation of fibrous debris

Applications

  • Industrial
  • Municipal
  • Water
  • Wastewater

Model DVFU

Submersible semi-open vortex impeller sewage pump

The model DVFU submersible pumps are made of tough cast iron with heavy-duty motors suitable for industrial and municipal water and sewer water, drainage and sewage applications where the discharge water or the pumpage contains fibrous or large solids. The high-efficiency, semi-open recessed vortex impeller makes it possible to pass abrasive and large, suspended  solids up to 5″ and works to prevent clogging. The model DVFU are available with FM motors.

Specifications

  • Discharge Size: 2″ to 6″
  • Range of HP: 2 to 30 HP
  • Capacity: 16 to 1200 GPM
  • Head: 13 to 121 Ft.
  • Max. solid diameter: 5″
  • Max. liquid temperature: 104°F (40°C)
  • FM explosion proof available

Key Features

  • Air-filled, heavy-duty Class H insulated motor – operates cooler with higher efficiencies
  • Motor protection – Built-in Klixon thermal detector and mechanical seal leakage protection minimize maintenance costs
  • Molded watertight cable entry system – protects against moisture and capillary action; reduces maintenance costs
  • 60,000 hour single and double row thrust bearings – long dependable operation, lowers maintenance costs
  • Large solids handling capabilities – prevents clogging
  • Semi-open vortex type recessed impeller – multi-vane vortex design handles stringy material better and prevents clogging providing high reliability, durability and lower maintenance costs
  • Double mechanical seals – operate in an oil bath providing longer service life and lower maintenance costs
  • Stainless steel shaft – high tensile strength and corrosion resistance
  • Replaceable wear components – maintain working clearances while reducing casing and volute costs

Applications

  • Industrial
  • Municipal
  • Water
  • Wastewater
  • Sewage
  • Drainage
  • Agriculture

Model EFQU, EFQT

Self-priming trash pump

EBARA EFQ series pumps are available in a wide range of materials and sizes to handle solids and light slurries efficiently and effectively. The EFQ trash pump features a large volute that allows for quick priming even with the casing only partially filled and an open suction line. Easy to install in various mounting configurations including flex-coupled and horizontal or vertical V-belt, the EFQ series work in a wide range of commercial, municipal and industrial water, wastewater and sewage applications.

Specifications

  • Discharge Size: 2 to 12 inch
  • Range of HP: to 125 HP
  • Capacity: to 3400 GPM
  • Head: to 210 Ft.
  • Max. solid diameter: 3″

Key Features

  • Large solids handling capabilities prevents clogging – 3″ solids handling (EFQT), 1.25″ solids (EFQU)
  • Robust cast iron casing with ductile iron impeller standard
  • Easy maintenance – Removable cover plates and rotating elements for quick inspection and cleaning of the pump without having to detach from the piping
  • Backside pump-out vanes reduce pressure on the seal and exclude solids from the seal area
  • Multi-vane, semi-open, high efficiency impellers
  • External shimless wear plate adjustment
  • Easy removal cover plates and rotating element
  • Cartridge Seals with Tungsten Carbide/Tungsten Carbide faces; design allows for quick replacement and ease of installation
  • Alternate construction materials available on request including 304SS, 316SS and CD4 MCU
  • Diesel engine operation, trailer or skid mounted

Applications

  • Water
  • Wastewater
  • Sewage
  • Slurry
  • Irrigation
  • Dewatering

DSC4, DSCA4

Large submersible cast iron wastewater, sewage pump

New! 32 enclosed impeller models with extended hydraulics, higher horsepowers, higher flows, larger discharge and suction sizes, and ICS options now available!

The model DSC4, DSCA4 submersible pumps are constructed of rugged cast iron with heavy-duty, high-efficiency motors suitable for industrial and municipal water and wastewater, sewage and flood control applications. The large submersible non-clog pump has the ability to pass large spherical solids and can be installed in wet or drypit configurations.

Specifications

  • Discharge Size: 6″ to 20″
  • Range of HP: 50 to 245 HP
  • Capacity: 530 to 12500 GPM
  • Head: 12 to 300 Ft.
  • Max. solid diameter: 8 1/8″
  • Max. liquid temperature: 104°F (40°C)
  • FM explosion proof available

Key Features

  • Watertight cable entry system with redundant protection ensures safe operation and protects against water leakage into terminal casing; reduces maintenance costs
  • Terminal board provides easy cable connection
  • Heavy-duty, high-efficiency, compact designed motor with thermal detector for each phase of winding; inverter duty rated and FM approved
  • Self-cooling system with cooling jacket eliminates the need for external pumping devices or special heat transfer fluids; offers simplicity and high reliability by effectively dissipating heat
  • Float type leakage detector provides early warning of mechanical seal failure; avoids costly motor repairs
  • Cartridge type, duplex mechanical seals assembled in tandem arrangement provides high reliability and easy maintenance
  • Available with semi-open or enclosed impellers
  • Optional thrust bearing RTD

Applications

  • Water
  • Wastewater
  • Sewage
  • Flood control

DSC, DSCA3

Large submersible cast iron wastewater, sewage pump

The model DSC, DSCA3 submersible pumps are constructed of rugged cast iron with heavy-duty, high-efficiency motors suitable for industrial and municipal water and wastewater, sewage and flood control applications. The large submersible non-clog pump has the ability to pass spherical solids up to 8″ in diameter and can be installed in wet or drypit configurations.

Specifications

  • Discharge Size: 6″ to 24″
  • Range of HP: 30 to 500 HP
  • Capacity: 530 to 35,000 GPM
  • Head: 8 to 300 Ft.
  • Max. solid diameter: 8 1/8″
  • Max. liquid temperature: 104°F (40°C)
  • FM explosion proof available

Key Features

  • Heavy-duty, air-filled Class H insulated motor – operates cooler with higher efficiencies
  • Watertight cable entry system – protects against moisture and capillary action and reduces maintenance costs
  • Self-cooling jacket – provides high reliability and effectively dissipates heat
  • Double and triple row lubricated thrust bearings – L-10 life of 100,000 hours equates to long, dependable operation and lower maintenance costs
  • Float type leakage detector – provides early warning of mechanical seal failure avoiding costly motor repairs
  • Cartridge type, duplex mechanical seals – assembled in tandem arrangement leading to high reliability and easy maintenance
  • High-efficiency, closed mixed flow impellers – are able to pass large diameter solids with high outputs, preventing clogging and lower operating costs
  • Replaceable case liner ring – maintains working clearances while reducing casing costs

Applications

  • Industrial
  • Municipal
  • Water
  • Wastewater
  • Flood control
Ebara Logo