Non-Clog Pumps

  • A 3NC series pump,
  • A 4NC non-clog pump.
  • Schematics of a 4NC pump.
A 3NC series pump,
A 4NC non-clog pump.
Schematics of a 4NC pump.

NC Series Non-Clog Pumps

Applications

  • Used for a multitude of purposes in commercial and industrial applications such as: sewage, effluent, irrigation, and general dewatering.

Features and Benefits

  • Simplified On-Site Maintenance: Field adjustable wear plate provides clearance between the impeller and volute for simplified maintenance, minimizing operational downtime while maximizing profit without the need and additional cost of a replaceable wear ring
  • Up To 6 Times Longer Seal Life: Factory standard dual silicon carbide mechanical seals have low thermal expansion and higher abrasion resistance than carbon versus ceramic commonly used for both seals
  • Factory standard exclusion seal provides a first line of defense. If the exclusion seal and first mechanical seal is breached, the Seal Fail probe will send a signal to the control panel providing an alert for service.
  • Premium Heat & Chemical Resistance: Motor enclosure sealing system utilizes Fluroelastomer (FKM) O-Rings to offer added chemical and temperature resistance
  • Corrosion Resistance Comes Standard: All castings are powder coated, while ductile iron casted impellers provide added corrosion resistance and are less brittle when handling rigid debris versus competitive cast iron versions
  • Fully Supported: Comes fully supported by an industry-leading team of Technical Support and Service professionals
  • All 1-Phase Non-Clog Pumps require a specific starter kit from FPS, matched to the pump for proper operation and third-party approval.

Specifications

  • 3″ horizontal flange discharge (125# ANSI flange)
  • Maximum solids size: 2.5″
  • Power cable – 8/4 -type SOOW– 30′ & 50′
  • Sensor cable – 16/4 – type SOOW – 30’ & 50′
  • Class F motor insulation
  • Continuous duty motor (104 °F maximum)
  • Lower double row ball bearing
  • 300 series SST motor shaft
  • Seal-fail indication probe
  • 300 series SST fasteners
  • Cast iron motor housing, volute, and seal chamber
  • Fluoroelastomer (FKM) sealing system for motor enclosure
  • Mechanical seals: Dual silicon carbide
  • Additional exclusion seal
  • Agency listing: cCSAus
  • *The 1-Phase Non-Clog Pump requires a specific starter kit from FPS, matched to the pump for proper operation and third-party approval.

3NC Series

The FPS® NC Series Non-Clog Pumps are available in single- and three-phase power options to provide a rugged, maintenance-friendly wastewater transfer solution with flows up to 610 gpm. Featuring a field adjustable wear plate and factory standard dual silicon carbide mechanical seals, the NC Series also comes fully supported by an industry-leading team of Technical Support and Service professionals.


4NC Series

The FPS® NC Series Non-Clog Pumps are available in single- and three-phase power options to provide a rugged, maintenance-friendly wastewater transfer solution with flows up to 610 gpm. Featuring a field adjustable wear plate and factory standard dual silicon carbide mechanical seals, the NC Series also comes fully supported by an industry-leading team of Technical Support and Service professionals.


NCX Series – Explosion Proof, Non-Clog Pumps

Applications

  • Used in a variety of applications such as lift stations; sewage systems; stormwater, flood and pollution control; industrial waste and dewatering; wastewater treatment plants; and general fluid transfer
  • Also used in municipal, commercial, and industrial markets for applications that require explosion-proof rating

Features & Benefits

  • Simplified On-Site Maintenance: Field adjustable wear plate provides adjustable clearance between the impeller and volute for simplified maintenance, minimizing operational downtime without the need and additional cost of a replaceable wear ring
  • Up To 6 Times Longer Seal Life: Factory standard dual silicon carbide mechanical seals have low thermal expansion and higher abrasion resistance than carbon versus ceramic commonly used for both seals, resulting in superior performance and longevity
  • Premium Heat & Chemical Resistance: Motor enclosure sealing system utilizes Viton® O-rings to offer added chemical and temperature resistance
  • Corrosion Resistance Comes Standard: Ductile iron casted impellers provide added corrosion resistance and are more robust when handling rigid debris versus competitive cast iron versions
  • Fully Supported: Comes fully supported by an industry-leading team of technical support and service professionals
  • All single-phase Non-Clog Pumps require a specific starter kit from FPS, matched to the pump for proper operation and third-party approval

Specifications

  • 3″ horizontal flange discharge (125# ANSI flange)
  • Maximum solids size: 2.5″
  • Power cable – 10GA/8GA – 316 SST Receptacle, 304 SST Coupling
  • Control cable – 18GA – 316 SST Receptacle, 304 SST Coupling
  • Class H motor insulation
  • Continuous duty motor (104 °F maximum)
  • AISI 416 SST motor shaft
  • Dual moisture sensing probes
  • 300 series SST fasteners
  • Cast iron motor housing, volute, and seal chamber
  • Viton® sealing system for motor enclosure
  • Mechanical seals: Dual silicon carbide
  • Agency listing: cCSAus, Certified for Class 1 Division 1 Groups C & D
  • *The 1-Phase Non-Clog Pump requires a specific starter kit from FPS, matched to the pump for proper operation and third-party approval.

3NCX Series

The FPS NCX Series Explosion Proof Non-Clog Pumps are available in single- and three-phase power options to provide a rugged, maintenance-friendly municipal wastewater transfer solution with flows up to 625 gpm. Featuring a field adjustable wear plate and factory standard dual silicon carbide mechanical seals, the NCX Series sets the bar for serviceability and reliability.


4NCX Series

The FPS NCX Series Explosion Proof Non-Clog Pumps are available in single- and three-phase power options to provide a rugged, maintenance-friendly municipal wastewater transfer solution with flows up to 625 gpm. Featuring a field adjustable wear plate and factory standard dual silicon carbide mechanical seals, the NCX Series sets the bar for serviceability and reliability.

Franklin Electric Logo