Close-Coupled Centrifugal Pumps

  • AG Series Centrifugal Pumps
  • A schematic of a 75-inch I series centrifugal pump
  • A schematic of a 9-inch I series centrifugal pump
  • A schematic of a 10-inch I series centrifugal pump
  • A schematic of 13-inch I series centrifugal pump
  • An A series centrifugal pump
  • The DR series of centrifugal pumps
  • A D Series centrifugal pump
  • A schematic of an FAC series centrifugal pump
  • An FBC series centrifugal pump
AG Series Centrifugal Pumps
A schematic of a 75-inch I series centrifugal pump
A schematic of a 9-inch I series centrifugal pump
A schematic of a 10-inch I series centrifugal pump
A schematic of 13-inch I series centrifugal pump
An A series centrifugal pump
The DR series of centrifugal pumps
A D Series centrifugal pump
A schematic of an FAC series centrifugal pump
An FBC series centrifugal pump

AG Series Pumps

The AG series pumps are close-coupled, electric motor driven pumps producing flows ranging from 65 through 900 gallons per minute. They feature all-iron construction, enclosed impellers, mechanical shaft seals, replaceable stainless steel shaft sleeves and are all back pull-out design for ease of service. Standard JM shaft motors are available with either an ODP or TEFC enclosure and either single or three phase standard voltages to fit your site requirements.

From well irrigated pastures to watering acres of farmland to meet crop requirements, the AG Series can keep your business growing. With 9 of the industry’s most popular rating options, standard JM and JP motor frames, and a back pull-out assembly for ease of seal replacement, the AG Series proves to offer improved efficiency and overall performance.

Features

  • 9 pump families covering the most popular hydraulic performance ranges
  • Designed for increased efficiency and performance
  • Threaded NPT and 125# flanged connection options
  • Flow ranges from 50–900 gpm
  • NEMA standard JM and JP shaft motors; 1800 and 3600 rpm; ODP and TEFC enclosures available
  • Back pull-out design
  • Standard carbon/ceramic/nitrile/316 stainless steel mechanical seals or packing-box option
  • 416 stainless steel shaft sleeves
  • ASTM-A48 CL30 cast iron volute and impellers

Specifications

  • Capacities to 900 gpm
  • Heads to 300 feet
  • 150 psi maximum working pressure
  • 212 °F maximum temperature

Applications

  • Pressure Boosting
  • Water Supply and Treatment
  • Wash Down
  • Water Recirculation
  • Irrigation

Sizes

  • A1 x 1.5-7
  • A1.5 x 2-6
  • A2 x 3-10
  • A2.5 x 4-10
  • A2 x 2.5-6
  • A2 x 3-8
  • A2.5 x 3-6
  • A3 x 4-6
  • A3 x 4-9

I Series – 7.5 Inch

The HC Series features heavy duty ductile iron volutes combined with low NPSH characteristics. This rugged pump was designed to handle tough applications, but also with serviceability in mind. It features jack-out holes for ease of service as well as replaceable shaft sleeve and bronze wear-rings. Available in packing or mechanical seal and ODP or TEFC, this pump is appropriate for use in various applications.

Features

  • Volute: Ductile iron for heavy duty service. Back pullout design. Can be rotated for ease of installation
  • Impeller: Enclosed design for high efficiency. Configured for superior NPSH characteristics, ductile iron construction, internally hydraulically balanced for reduced bearing load
  • Seal: Packed box with lantern ring or mechanical seal with silicon carbide/silicon carbide, FKM elastomers
  • Motor: 3600 rpm standard JP frame to 50 hp, greater than 50 hp requires custom shaft JP frame. ODP or TEFC motors available
  • Mounting: Can be mounted in vertical or horizontal position

Maintenance Features

  • Replaceable bronze wear-rings
  • Replaceable shaft sleeve
  • Casing jack-out holes for ease of service
  • Two piece stainless packing gland

Applications

  • Irrigation
  • Commercial
  • Construction
  • Municipal
  • Mining
  • Light Industrial

I Series – 9 Inch

The XS Series was designed with performance, serviceability, and reliability in mind. These pumps include max-life bearings, standard JP motors, additional mounting options, mechanical and packing seals, casing jack-out holes, and enclosed hydraulically balanced impellers for exceptional performance and low NPSH qualities.

Features

  • Volute: Heavy cast iron construction, back pullout design. Can be rotated for ease of installation
  • Impeller: Cast iron enclosed design for high efficiency hydraulically balanced for reduced bearing load
  • Seal: Packed box with lantern ring or mechanical seal with carbon/ceramic faces, Nitrile elastomers and 300 series stainless components
  • Motor: 1800 rpm JP standard frame. Available in ODP or TEFC enclosures
  • Mounting: Can be mounted in a vertical or horizontal position

Maintenance Features

  • Replaceable shaft sleeve
  • Jack out holes
  • 2 piece stainless packing gland

Applications

  • Irrigation
  • Commercial
  • Construction
  • Municipal
  • Light Industrial
  • General Services

I Series – 10 Inch

The HC Series features heavy duty ductile iron volutes combined with low NPSH characteristics. This rugged pump was designed to handle tough applications, but also with serviceability in mind. It features jack-out holes for ease of service as well as replaceable shaft sleeve and bronze wear-rings. Available in packing or mechanical seal and ODP or TEFC, this pump is appropriate for use in various applications.

Features

  • Volute: Ductile iron for heavy duty service. Back pullout design. Can be rotated for ease of installation
  • Impeller: Enclosed design for high efficiency. Configured for superior NPSH characteristics, ductile iron construction, internally hydraulically balanced for reduced bearing load
  • Seal: Packed box with lantern ring or mechanical seal with silicon carbide/silicon carbide, FKM elastomers
  • Motor: 1200, 1800, 3600 rpm available. Standard JP frames, 3600 10-50 hp & 1800 7.5-50 hp, all others use custom shaft JP frames. ODP or TEFC motors available
  • Mounting: Can be mounted in vertical or horizontal position

Maintenance Features

  • Replaceable bronze wear-rings
  • Replaceable shaft sleeve
  • Casing jack-out holes for ease of service
  • Two piece stainless packing gland

Applications

  • Irrigation
  • Commercial
  • Construction
  • Municipal
  • Mining
  • Light Industrial

I Series – 13 Inch

The XS Series was designed with performance, serviceability, and reliability in mind. These pumps include max-life bearings, standard JP motors, additional mounting options, mechanical and packing seals, casing jack-out holes, and enclosed hydraulically balanced impellers for exceptional performance and low NPSH qualities.

Features

  • Volute: Cast iron for heavy duty service. Back pullout design. Can be rotated for ease of installation. 6 x 8 -13 and 8 x 10 – 13 are split volutes for reduction in radial bearing load
  • Impeller: Enclosed design for high efficiency. Configured for superior NPSH characteristics, stainless steel construction. Internally hydraulically balanced for reduced bearing load
  • Seal: Packed box with lantern ring or mechanical seal with carbon ceramic faces, Nitrile elastomers and 300 series stainless components
  • Motor: 1800 RPM standard JP frame. ODP or TEFC motor available
  • Mounting: Can be mounted in vertical or horizontal position

Maintenance Features

  • Replaceable bronze wear rings
  • Replaceable shaft sleeve
  • Casing and frame jack-out holes
  • Volute lifting bosses
  • 2 piece stainless packing gland

Applications

  • Irrigation
  • Commercial
  • Construction
  • Municipal
  • Mining
  • Light Industrial

A Series

Flooded suction centrifugal pump suitable for use with saltwater, chemical transfer, and other pumping applications that deal with corrosive substances.

Features

  • High-tech, non-corrosive plastic construction. All metal components that have contact with liquid are stainless steel
  • Motor shaft is completely insulated from any contact with pumping liquid
  • 2-inch union connections ensure easy service and optimum water flow. Unions must be ordered separately
  • Discharge port easily rotates to 90 degree increments without removing motor
  • Lightweight design

DR Series

The robust DR1-DR2 series pumps are available in a variety of pump construction materials to enable handling a wide array of applications. Square flange, 56J threaded and 56C keyed shaft motor driven units are available, as well as pump end kits for those customers who choose to provide their own 56J or 56C motors.

Features

  • Back pull-out design provides access to internal parts without disturbing the plumbing
  • Robust cast iron volute standard; stainless steel alternate available for DR1 Series
  • Volute discharge can be rotated in 90° increments with top vertical standard from the factory
  • Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation
  • Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options
  • Multiple mechanical seal construction materials to accommodate handling various fluids
  • Every pump unit factory wet tested to insure customer satisfaction
  • Suitable for horizontal or vertical (motor end up) installation
  • NEMA standard motor options include:
  • Pump end kits available for 56C & 56J motor construction
  • Rotation: right hand; clockwise when viewed from motor end
  • Maximum fluid handling temperature 180 °F (82 °C)

Applications

  • Water circulation
  • Booster service
  • Liquid transfer
  • Spraying systems
  • Jockey pump service
  • General purpose pumping

D Series

The robust D Series centrifugal pumps come standard with heavy-duty cast iron bodies for durability and dynamically balanced impellers for reduced bearing loads and pump longevity. With models ranging from 0.5 to 50 hp, single- and three-phase motor options, as well as TEFC and ODP enclosure options, these pumps are sure to meet the demands of various applications.

Features

  • Heavy-duty cast iron body for increased durability
  • DA1A and DA1B have stainless steel impellers
  • DB1 through DB2/DC2 have bronze impellers
  • DC4 has cast iron impellers
  • 1/2-2HP models have 56C frame motors with shaft coupling design for easy removal of pump motor
  • JM frame motors utilize a shaft sleeve/O-ring design for added protection against shaft damage
  • Single- or three-phase motors with ODP and TEFC options available on selected models
  • Seal comprised of carbon/ceramic faces, nitrile elastomers and 300-series stainless components

Applications

  • Irrigation
  • Commercial
  • Construction
  • Municipal
  • Light Industrial
  • General Services

FAC Series

Features

  • Volute: Cast iron, can be rotated for ease of installation. Tapped openings provided for draining
  • Impeller: Enclosed design for high efficiency. Cast iron construction
  • Mechanical Seal: GL-SiC/GL-SiC x FKM elastomers and 300 series stainless components
  • Motor (1/2-2 hp): 3600 rpm, 56J, C-Face, open-drip-proof. Designed for continuous operation
  • Motor (3-5 hp): Standard 3600 rpm JM, open-drip-proof. Designed for continuous operation
  • Mounting: Can be mounted in vertical or horizontal position

Applications

  • Water Circulation
  • Booster Service
  • Liquid Transfer
  • Spraying Systems
  • Jockey Pump
  • General Service

FBC Series

Franklin Electric’s new FBC Series Single-Stage Horizontal Centrifugal Pumps are offered in 1-1/2 and 2 hp versions that pump at 40 to 200 gpm at heads up to 130 feet. The rugged pumping line features standard 316 stainless steel impellers that can handle a variety of fluids, including those with small abrasives and hydrocarbons. It’s Fluoroelastomer (FKM) silicon carbide seal provides additional protection against heat and abrasives, and a non-overloading design protects against field challenges such as power dips, pipe breaks, improper application setup, and more.

Features

  • Flow range from 40–200 gpm covers a wide variety of pumping applications
  • High efficiency performance design for reduced lifetime cost of operation
  • Threaded NPT connection volute, 2.5″ suction x 2″ discharge accepts standard pipe fittings
  • Volute can be rotated in 90° increments to simplify discharge plumbing
  • 1/4″ ports provide for pressure fitting and/or drain line connections
  • Suitable for horizontal or vertical mounting for versatility of installation
  • Robust cast iron volute and motor bracket with integral mounting feet for ease of installation
  • Back pull-out design enables serviceability without disconnecting plumbing
  • 316SS impeller is suitable for handling a wide variety of fluids without corrosion or electrolysis and is resistant to the effects of cavitation
  • Mechanical seal constructed of SiC/SiC/FKM/316SS (FKM silicone carbide), can withstand mild abrasives and is suitable for handling a variety of fluids, including those containing hydrocarbons
  • NEMA 56J threaded shaft motors with 316SS shaft extension for a compact pump unit
  • 1800 and 3600 RPM fixed-speed motors provide for a wide range of hydraulics
  • Motors are available in both ODP and TEFC enclosures to best fit the operating environment
  • Three-phase motors offer a premium efficient design, have Class F insulation, and are rated and Inverter Ready for use with variable frequency drives
  • Pumps are 100% wet tested at the factory to ensure quality and reliability

Applications

  • Pressure Boosting
  • Water Supply and Treatment
  • Water Feature
  • Water Recirculation
  • Irrigation
  • Fuel/Oil Transfer