Stainless Steel

EVMU, EVMUL, EVMUG

With initial hydraulic coverage to 100 GPM and 800 feet TDH, the EBARA model EVMU is designed for booster, water purification, and hot water applications.

State-of-the-art formed stainless steel and several proprietary internal components make the EBARA model EVMU superior to existing designs. The EVMU material is between 50 to 100% thicker than all current similar product offerings, for a true industrial design with cast stainless steel flanges for maximum installation support.

EVMU 32, 45 and 64 models consist of cast iron or 304SS hydraulic assemblies. Different mechanical seal face options are available for the three models and incorporate a separate thrust bearing in lieu of motor bearings, a popular design feature.

Models EVMU3-18, EVMUL 3-64 are NSF/ANSI 61 Annex G listed

Specifications

  • Suction Size: 1 1/4″ to 4″ ANSI
  • Discharge Size: 1 1/4″ to 4″ ANSI
  • Range of HP: 1/2 to 50 HP
  • Capacity: 4 to 390 GPM
  • Head: 27 to 930 Ft.
  • Working pressure: 370 PSI (25 Bar) max. (see page technical section, page 813 for specific pressure information)
  • Temperature: 5 ̊ to +248 ̊F (-15 ̊ to 120 ̊C)
  • Liquid: clean water, hot water

Key Features

  • Standard NEMA motors
  • Integral thrust bearing on 3 HP and larger pumps – to handle axial thrust loads
  • Air vent in casing cover – allows proper venting, preventing air entrapment and dry run
  • Liner ring – self-aligning, floating design constructed to prevent swelling at high temperatures
  • Tungsten carbide lower pump bearings and sleeves – standard construction for all services, providing maximum operating life
  • Direct drive – pump and motor shafts are keyed for positive, reliable power transmission with no adjustments necessary
  • “Flexible” floating outer casing – allows for thermal expansion in hot water applications, preventing deformation due to pressure fluctuations
  • Anti-erosion measures – a dish-shaped insert is fitted to the intermediate casing designed to promote smooth flow and prevent high velocity areas

Applications

  • Municipal
  • Industrial
  • Agriculture
  • Pressure/water boosting
  • Boiler feed
  • HVAC
  • Hot/Cold water circulation
  • Fire fighting
  • Filtration
  • Reverse osmosis
  • Washing systems
  • Filtration
  • Irrigation

CDU, CDX

Constructed of bulge-formed stainless steel, the model CDU, CDX end suction centrifugal pump is designed for corrosion resistance, dependable performance and high-efficiency, continuous duty. High-quality stainless steel components are stronger, dimensionally consistent and lighter weight compared to conventional cast iron, making EBARA centrifugal pumps competitively priced and an economical advantageous choice. The model CDU, CDX is suitable for almost any commercial and industrial general water applications that require corrosion resistance including those with moderately aggressive liquids.

Model CDU is NSF/ANSI 61 Annex G listed

Specifications

  • Suction Size: 1 1/4″ to 1 1/2″
  • Discharge Size: 1″
  • Range of HP: 3/4 to 3 HP
  • Capacity: 5.5 to 95 GPM
  • Head: 26 to 144 Feet
  • Max. working pressure: 125 PSI (9 Bar)
  • Temperature: 212°F (100°C); Max. temperature 250°F (121°C) with optional high temperature seal
  • Liquid: clean water

Key Features

  • Close coupled design – saves space; simplifies maintenance and installation
  • Stainless steel liquid end components – high quality; corrosion resistance
  • Versatile mounting – can be installed horizontally or vertically
  • Back pullout construction – allows for assembly and overhaul of the impeller and seal without distorting suction and discharge connections
  • Top centerline discharge and foot support under casing – ensures self-venting and reduces misalignment from pipe loads
  • High-efficiency – lowers operating costs
  • High quality mechanical shaft seals and o-rings – available for standard pumping requirements, or optional high temperature and chemical duty operation
  • Available as a complete pump or as a kit

Applications

  • Plant services
  • Water supply systems
  • Liquid transfer
  • Ultrapure water systems
  • Water reclamation
  • Water treatment
  • Irrigation
  • Air conditioning systems

3U, 3UB

The model 3U, 3UB end suction centrifugal pump are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance and rugged continuous duty. The 3UB-65 models extend the hydraulic performance range of the 3U series to 750 GPM with trimmable bronze impellers available.

Constructed of bulge-formed stainless steel, model 3U, 3UB end suction centrifugal pumps are designed for corrosion resistance, dependable performance and high-efficiency, continuous duty. High quality stainless steel components are stronger, dimensionally consistent and lighter weight compared to conventional cast iron, making EBARA centrifugal pumps competitively priced and an economical advantageous choice. The model 3U, 3UB series are suitable for almost any commercial and industrial general water applications that require corrosion resistance including those with moderately aggressive liquids.

NSF/ANSI 61 Annex G listed

Specifications

  • Suction Size: 2″ to 3″
  • Discharge Size: 1 1/4″ to 2 1/2″
  • Range of HP: 3 to 30 HP
  • Capacity: 13 to 650 GPM
  • Head: 33 to 250 Ft.
  • Max. working pressure: 145 PSI (10 Bar)
  • Temperature: 212°F (100°C); Max. temperature 250°F (121°C) with optional high temperature seal
  • Liquid: clean water

Key Features

  • Close coupled design – saves space; simplifies maintenance and installation
  • Stainless steel liquid end components – high quality; corrosion resistance
  • Versatile mounting – can be installed horizontally or vertically
  • Back pullout construction – assembly and overhaul of the impeller and seal without distorting suction and discharge connections
  • Top centerline discharge and foot support under casing – ensures self-venting and reduces misalignment from pipe loads
  • High-efficiency – lowers operating costs
  • High quality mechanical shaft seals and o-rings – available for standard pumping requirements, or optional high temperature and chemical duty operation
  • Available as a complete pump or as a kit

Applications

  • Plant services
  • Water supply systems
  • Liquid transfer
  • Ultrapure water systems
  • Water reclamation
  • Water treatment
  • Temperature Control
  • Air conditioning systems

2CDXU, 2CDU

The model 2CDXU, 2CDU two-stage, end suction pumps are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance and high-efficiency, continuous duty. High-quality stainless steel components are stronger, dimensionally consistent and lighter weight compared to conventional cast iron, making EBARA centrifugal pumps competitively priced and an economical advantageous choice. Models 2CDXU, 2CDU are suitable for commercial and industrial pressure boosting and general water applications including water supply, water treatment, irrigation and in air conditioning systems.

Model 2CDU is NSF/ANSI 61 Annex G listed

Specifications

  • Suction Size: 1 1/4″ to 1 1/2″ NPT thread
  • Discharge Size: 1″ NPT thread
  • Range of HP: 2 to 5 HP
  • Capacity: 5.5 to 66 GPM
  • Head: 98 to 245 Ft.
  • Max. working pressure: 125 PSI (9 Bar)
  • Temperature: 212°F (100°C)
  • Liquid: clean water

Key Features

  • Close coupled design– saves space; simplifies maintenance and installation
  • Stainless steel liquid end components– high quality; corrosion resistance
  • Versatile mounting– can be installed vertically or horizontally
  • Back pullout construction– assembly and overhaul of the impeller and seal without distorting suction and discharge connections
  • Top centerline discharge and foot support under casing– ensures self-venting and reduces misalignment from pipe loads
  • High operating efficiency– lowers operating costs
  • High quality mechanical shaft seals and o-rings– available for standard pumping requirements, or optional high temperature and chemical duty operation.
  • Available with IP55 TEFC motors (2CDXU) or Standard NEMA motor (2CDU)

Applications

  • Pressure boosting
  • Plant services
  • Water supply systems
  • Liquid transfer
  • Ultrapure water systems
  • Pharmaceutical services
  • Reverse osmosis
  • Water reclamation
  • Water treatment
  • OEM equipment application

DWO

The model DWO open impeller end suction pumps are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance and high-efficiency, continuous duty. High-quality stainless steel components are stronger, dimensionally consistent and lighter weight compared to conventional cast iron, making EBARA centrifugal pumps competitively priced and an economical, advantageous choice. The model DWO is suitable for applications with suspended solids including food and beverage processing, dirty liquid handling and other plant services such as industrial washing machine water.

Specifications

  • Suction Size: 2 to 2 1/2″ NPT (female) thread
  • Discharge Size: 2″ NPT (female) thread
  • Range of HP: 1 1/2 to 4 HP
  • Capacity: to 250 GPM
  • Head: 35 to 65 Ft.
  • Max. working pressure: 116 PSI (8 Bar)
  • Temperature: 194°F (90°C)
  • Liquid: suitable for suspended 3/4″ spherical solids in semi-dirty water

Key Features

  • Open impeller – suitable for suspended solids in liquid and dirty water; solids handling to 3/4″ (spherical)
  • Close coupled design – saves space; simplifies maintenance and installation
  • Stainless steel liquid end components – high quality; corrosion resistance; NPT threaded connections, hose barb connections
  • Back pullout construction – assembly and overhaul of the impeller and seal without distorting suction and discharge connections
  • Top centerline discharge and foot support under casing – ensures self-venting and reduces misalignment from pipe loads
  • High operating efficiency – lowers operating costs
  • High quality mechanical shaft seals and o-rings – available for standard pumping requirements, or optional high temperature and chemical duty operation.
  • TEFC motors, IEC motors manufactured by EBARA Corporation

Applications

  • Food process
  • Beverage process
  • Dirty liquid handling
  • OEM equipment application
  • Water reclamation
  • Water treatment
  • Plant services

With initial hydraulic coverage to 100 GPM and 800 feet TDH, the EBARA model EVMU is designed for booster, water purification, and hot water applications. State-of-the-art formed stainless steel and several proprietary internal components make the EBARA model EVMU superior to existing designs. The EVMU material is between 50 to 100% thicker than all current similar product offerings, for a true industrial design with cast stainless steel flanges for maximum installation support. EVMU 32, 45 and 64 models consist of cast iron or 304SS hydraulic assemblies. Different mechanical seal face options are available for the three models and incorporate a separate thrust bearing in lieu of motor bearings, a popular design feature.

Product Description

With initial hydraulic coverage to 100 GPM and 800 feet TDH, the EBARA model EVMU is designed for booster, water purification, and hot water applications. State-of-the-art formed stainless steel and several proprietary internal components make the EBARA model EVMU superior to existing designs. The EVMU material is between 50 to 100% thicker than all current similar product offerings, for a true industrial design with cast stainless steel flanges for maximum installation support. EVMU 32, 45 and 64 models consist of cast iron or 304SS hydraulic assemblies. Different mechanical seal face options are available for the three models and incorporate a separate thrust bearing in lieu of motor bearings, a popular design feature.