Heat Transfer

SIHI SuperNova – Hot Water Pumps

The SIHI SuperNova series are part of the overall program of heat transfer and circulation pumps. They are primarily used for circulation of hot water in closed pipe and vessel systems.

Horizontal, single-stage volute pumps with dimensions and nominal ratings to DIN 24256 EN 22858 in back pull out construction, with un-cooled mechanical seal. The SIHI SuperNova series has especially been designed for the trouble free handling of hot water up to 446 °F.

 ZEND (PN 40)

 ZDND (PN 25)

 ZHND (PN 16)

Capacities to 2100GPM Capacities to 2100GPM   Capacities to 2100GPM
Head to 300 feet Head to 285 feet Head to 300 feet
Temperature to 446°F Temperature to 404°F Temperature to 356°F
PN 40 flanges:  drilled to DIN, ANSI 150# or ANSI 300# PN 40 flanges:  drilled to DIN, ANSI 150# or ANSI 300# PN 40 flanges:  drilled to DIN, ANSI 150# or ANSI 300#
Casing Pressure Limit 580 PSIG  Casing Pressure Limit 363 PSIG  Casing Pressure Limit 232 PSIG 
Uncooled Mech. Seal  Uncooled Mech. Seal   Uncooled Mech. Seal  

 


Features:

  • Double Heat Barrier
  • Unique Shaft Seal Housing
  • Back Pull Out Design

Technical Data:

  • Capacity: 2100 GPM
  • Total Head: 300 Ft.
  • Temperature: 446 °F (max.)
  • Material: Ductile iron

Note:

  • Applications exceeding these ranges, please consult Factory

Industries and Applications:

  • Heating of injection moulds, platens, dies and calendars, Circulation pumps in HTW systems and central boilers and solar heating systems. Used in systems where hot water is required as a heat carrier, despite its high system pressure.

Accessories:

  • Available upon request

ZTND – Pumps for Heat Transfer Oils

The ZTND Line is a specialty line of pumps specifically designed to handle hot thermal fluids. Pumps are available in 24 models with only two shaft sizes.

SIHI’s ZTND designs use a dual heat restricting design allowing the pumping of thermal fluids to 650+ °F. Engineered to allow ambient air cooling while minimizing thermal transfer along the shaft, they offer safety and efficiency, eliminating any need for liquid cooling through their operating range.

SIHI designers, using state of the art thermal modeling techniques, were able to create a unique rear cover and shaft housing which provides for thermal expansion compensation for the shaft seals and limits heat transfer along the shaft and housing to the grease lubricated bearing.

Shaft sealing is provided by either a set of v-ring lip seals (to minimize the possibility of catastrophic shaft seal failures) or single non-cooled mechanical seal.

Features:

  • Self-Cooling
  • Unique Shaft Sealing
  • Back Pull Out Design

Technical Data:

  • Capacity: 2600 GPM
  • Total Head: 296 Ft.
  • Temperature: 662°F (max.)
  • Material: Ductile iron

Note:

  • Applications exceeding these ranges, please consult Factory

Industries and Applications:

  • Chemical
  • Food
  • Rubber & Plastics
  • Paper
  • Laundries

Accessories:

  • Available upon request

ZTNY – (Heavy Duty) Pumps for Heat Transfer Oil

Volute pumps of the series ZTN have been specially developed for handling of mineral and synthetic heat transfer oils. The pumps may be used in installations with positive or negative suction pressure. This special version, ZTNY, has a volute casing with flange rating to 40 bar (580 psig). The larger diameter flange size and flange thickness will meet your customer’s requirements for higher rated flanges suitable for ANSI class 300 RF piping for thermal oil systems.

Features:

  • Self-Cooling
  • Unique Shaft Sealings
  • Back Pull Out Design

Technical Data:

  • Capacity: 1800 GPM
  • Total Head: 295 Ft.
  • Temperature: 662°F (max.)
  • Material: Ductile iron

Note:

  • Applications exceeding these ranges, please consult Factory

Industries and Applications:

  • Asphalt
  • Chemical
  • Food
  • Rubber & Plastic
  • Paper
  • Laundries

Accessories:

  • Available upon request
Category:

SIHI SuperNova series are part of the overall program of heat transfer and circulation pumps. They are primarily used for circulation of hot water in closed pipe and vessel systems.

Horizontal, single-stage volute pumps with dimensions and nominal ratings to DIN 24256 EN 22858 in back pull out construction, with un-cooled mechanical seal. The SIHI SuperNova series has especially been designed for the trouble free handling of hot water up to 446 °F.

Product Description

SIHI SuperNova series are part of the overall program of heat transfer and circulation pumps. They are primarily used for circulation of hot water in closed pipe and vessel systems.

Horizontal, single-stage volute pumps with dimensions and nominal ratings to DIN 24256 EN 22858 in back pull out construction, with un-cooled mechanical seal. The SIHI SuperNova series has especially been designed for the trouble free handling of hot water up to 446 °F.