ANSI

Posted on January 6, 2017

The Mark 3 ANSI is a horizontal, end suction, single stage, centrifugal, centerline discharge, “back pull-out” construction pump designed to handle demanding chemical processing and fluid handling services.

API

Posted on January 6, 2017

The ERPN is the pump of choice for severe chemical, petrochemical, refining and heavy-duty industrial service where deviations to API 610 are accepted. This pump provides users with the important mechanical, hydraulic, emissions control and safety components required by the latest ISO 13709/API 610 standards.

Barrier Systems

Posted on January 6, 2017

Liquid lubricated, dual mechanical seals require an external source of fluid. A properly selected supply tank system eliminates the need to connect to a distant and sometimes unreliable barrier fluid source. Flowserve offers a complete line of standard reservoirs for a wide range of sealing applications and custom designed supply tank systems based on your specifications.

Compressor Seals

Posted on January 6, 2017

The Flowserve Ampliflow helps ensure that an adequate supply of clean, filtered gas is provided to the seals during periods of low differential across the compressor.

Gas Panels

Posted on January 6, 2017

Buffer/Barrier gas panels combine flow monitoring and control elements in a self-contained, easy to use unit.

Gear

Posted on January 6, 2017

Capable of higher flows and pressures than GA Series pumps, GR Series pumps provide high efficiency, pulse-free pumping, even under the most challenging conditions. They are designed to handle viscous fluids across a broad spectrum of flows and pressures. The GR Series’ simple external design has only two moving parts and only one shaft seal to ensure long life and ease of maintenance.

Heat Transfer

Posted on January 17, 2017

SIHI SuperNova series are part of the overall program of heat transfer and circulation pumps. They are primarily used for circulation of hot water in closed pipe and vessel systems.

Horizontal, single-stage volute pumps with dimensions and nominal ratings to DIN 24256 EN 22858 in back pull out construction, with un-cooled mechanical seal. The SIHI SuperNova series has especially been designed for the trouble free handling of hot water up to 446 °F.

Horizontal Multistage

Posted on January 17, 2017

The type DMX is a horizontal split case, dual volute, heavy duty, high pressure multistage unit with opposed impellers in accordance with API 610 latest edition. It is available in various sizes and material combinations making it suitable for service on a wide range of process and industrial applications.

Magnetic Driven

Posted on February 6, 2017

Flowserve Durco Guardian sealless pump technology offers superior, leak-free performance in the most demanding services. Compliant with ASME (ANSI) B73.1-2001 dimensional standards, the Guardian magnetic drive pump is designed for simplicity and reliability in even the toughest emission-free services.

Magnetic Driven

Posted on January 6, 2017

The Innomag TB-Mag is a thrust-balanced, fluoropolymer-lined, magnetic drive pump for chemical processing, metals and other industries seeking outstanding leak protection and reliability. The TB-Mag is ASME B73.3 and ISO 2858 compliant.

Magnetic Driven

Posted on January 17, 2017

A large number of pumping processes, especially in the chemical industry, require pump sealing systems adapted to the particular application. In most applications these requirements are satisfied by pumps with magnetic couplings that by means of a motor, are able to statically seal the pump shaft from the atmosphere. This solution can replace various conventional sealing methods thereby reducing costs and increasing reliability. Process pumps are used for many different applications including the handling of corrosive, abrasive, toxic and foul smelling liquids.

Metal Bellows Seals

Posted on January 6, 2017

BRC Series edge-welded metal bellows seals are exceptionally robust and designed to seal high-temperature hydrocarbons, heat transfer fluids and severe services in refineries and hydrocarbon processing plants.

Mixer Seals

Posted on January 6, 2017

Designed to accommodate today’s demanding operating conditions and will satisfy tomorrow’s needs for increased shaft size, temperature, pressure, and speed applications.

Multistage

Posted on January 17, 2017

Series HEG multistage centrifugal pumps are an economical solution used in applications where the requirement is for trouble-free pumping of clear or slightly dirty liquids.  The difference between the Multi line and the HEGA is that the HEGA suction is on the drive end and the pump is “hung” between two sets of bearings and seals.

OEM & Specialty

Posted on January 6, 2017

Circpac MD Circpac MD seals are a segmented circumferential seal designed for fans, blowers, dryers, turbines, centrifuges and other rotating equipment. Circpac MD seals come packaged in a convenient split housing for easy installation. Standard designs consistently outperform packing, bushings, labyrinths, and felt seals with lower gas consumption over a wider range of operating conditions. […]

Reciprocating

Posted on January 6, 2017

The HS is a horizontal triplex and quintuplex positive displacement reciprocating pump with very high efficiency and is offered in a wide range of hydraulic, mechanical, and material options.

The VQE is a vertical quintuplex positive displacement reciprocating pump with very high efficiency and is offered in a wide range of hydraulic, mechanical, and material options.